| 玻璃钢脱硫塔的主要结构是什么？ |
| 添加时间：2019/5/8 14:19:48 浏览次数： |
| 玻璃钢脱硫塔的主要结构是怎样的玻璃钢脱硫塔主要由筒体，喷雾装置筛板脱水除雾装置溢水孔清理孔等组成，其工作原理是含烟尘及硫氧化物的烟气流通过进口烟道进入筒体，含有[OH-]离子的碱性水分别从脱硫塔上中下部由螺旋喷嘴喷出，形成与烟气成逆向的多排高速雾化水幕，增加了烟尘硫氧化物与水的碰撞概率，并充分利用雾化液滴的速度来造成很高的气液相对速度，以保证除尘和脱硫效果。同时气体经过筛板时对筛板上的液层产生鼓泡作用，增加了气液传质的表面积和湍动状态，提高了传质速率，二氧化硫与碱液发生气液交换，进一步提高了脱硫效果。 The main structure of the FRP desulphurization tower is what kind of FRP desulphurization tower is made up of cylinder body, spray device, sieve plate dewatering and defrosting device, overflow hole cleaning hole and so on. Its working principle is that flue gas flow containing smoke and sulphur oxide enters the cylinder through the inlet flue, and the alkaline water containing [OH-] ions is ejected from the middle and lower part of the desulfurization tower by the spiral nozzles, forming a reverse direction www.shidiaodaxiang.cnwww.xiaoxieqi.com.cnwww.banjiacz.cnwww.datongbanjia.cnwith the flue gas. www.hanbaiyushidiao.cnwww.shaiban.net.cnThe high-speed atomizing water curtain increases the probability of collision between sulfur oxides and water, and makes full use of the speed of atomizing droplets to cause high gas-liquid relative velocity, so as to ensure the effect of dust removal and desulfurization. At the same time, when gas passes through the sieve plate, it bubbles the liquid layer on the sieve plate, increases the surface area and turbulent state of gas-liquid mass transfer, improves the mass transfer rate, and gas-liquid exchange occurs between sulfur dioxide and alkali liquor, which further improves the desulfurization effect. |
| 上一页 在使用沼气之前，必须脱除其中的H2S |
| 下一页 砖厂脱硫塔在运输,安装,使用时应该注意以下几个问题 |
Copyright © 技术支持：遨游网络