烟气脱硫的大型脱硫装置称为脱硫塔，而用于燃煤工业锅炉和窑炉烟气脱硫的小型脱硫除尘装置多称为脱硫除尘器。在脱硫塔和脱硫除尘器中，应含SO2的烟气，对烟气中的SO2进行化学吸收。为了强化吸收过程，提高脱硫效率，降低设备的投资和运行费用，脱硫塔和脱硫除尘器应满足以下的基本要求： The large desulfurization device of flue gas desulfurization is called desulfurization tower, and the small desulphurization dedusting device used for the desulphurization of flue gas desulfurization of coal-fired industrial boilers and kiln furnaces is called desulfurizer. In desulphurization tower and desulfurization dust catcher, SO2 gas should be included in the chemical absorption of SO2 in the flue gas. In order to strengthen the absorption process, improve the desulfurization efficiency, reduce the investment and operation cost of the equipment, desulphurization tower and desulfurizer dust catcher should meet the following basic requirements: （1）气液间有较大的接触面积和 (1) there is a large amount of contact area between the air and liquid 一定的接触时间； Certain contact time; （2）气液间扰动强烈，吸收阻力小，对SO2的吸收效率高； (2) the disturbance between air and liquid is strong and the absorption resistance is small, and the absorption efficiency of SO2 is high; （3）操作稳定，要有合适的操作弹性； (3) operation stability, suitable operation flexibility; （4）气流通过时的压降要小； (4) the pressure drop of air passage is small; （5）结构简单，制造及维修方便，造价低廉，使用寿命长； (5) simple structure, convenient manufacturing and maintenance, low cost and long service life; （6）不结垢，不堵塞，耐磨损，耐腐蚀； (6) no scaling, no blockage, wear resistance, corrosion resistance; （7）能耗低，不产生二次污染。 (7) low energy consumption, no secondary pollution. SO2吸收净化过程，处理的是低浓度SO2烟气，烟气量相当可观，要求瞬间内连续不断地高效净化烟气。因而，SO2参加的化学反应应为极快反应，它们的膜内转化系数值较大，反应在膜内发生，因此选用气相为连续相、湍流程度高、相界面较大的吸收塔作为脱硫塔和脱硫除尘器比较合适。通常，喷淋塔、填料塔、喷雾塔、板式塔、文丘里吸收塔等能满足这些要求。其中，喷淋塔是使用最为广泛的脱硫塔类型之一，喷淋塔具有结构简单，工艺成熟可靠的优点，广泛应用于大型电厂，中小型低硫烟气治理；对于高硫烟气治理，有色行业以气动乳化脱硫塔、多层喷淋塔等为主。 SO2 absorbs the purification process, which deals with the low concentration of SO2 flue gas, which has a considerable amount of smoke and gas, and requires continuous and efficient cleaning of smoke in a moment. Therefore, SO2 in chemical reaction should be extremely fast response, within their membrane transformation coefficient value is bigger, the reaction occurred within the membrane, so choose the gas phase as the continuous phase, high degree of turbulence, the big absorption tower as the phase interface and desulfurization precipitator desulphurization tower is more appropriate. Usually, spray tower, packing tower, spray tower, plate tower, venturi absorption tower can meet these requirements. Among them, the spray tower is one of the most widely used type desulfurization tower, spray tower is simple in structure, the advantages of the technology mature and reliable, widely used in large power plant, small and medium low sulphur smoke management; For the treatment of high sulfur flue gas, the non-ferrous industry mainly USES pneumatic emulsified desulfurization tower and multi-layer spray tower.